Liner Banner2.jpg

Use KoolDuct as a Duct Liner for your Sheet Metal ductwork

A New Alternative to Fiberglass and Elastomeric Liners

The Kingspan KoolDuct System is now available as an interior liner for sheet metal ductwork. Newly developed methods for applying this patent pending construction process allow for KoolDuct's rigid phenolic panels from the UL 181 listed system to now be used to traditional metal ductwork. This fiber free insulation liner does not require adhesives and offers newfound strength to your ductwork. Using KoolDuct in place of a traditional limp, non-structural liner will give strength, performance, increased R-values and lower air leakage rates. Meet your IAQ goals with a duct insulation liner that resists mold growth.

Non-Fibrous Liner

Benefits of a KoolDuct Liner

牲畜幼儿园全文免费阅读
  • Available in R-6, R-8 or R-12 Values
  • 25/50 ASTM E84 Compliant
  • NFPA 90a Compliant
  • Lower Air Leakage Rates
  • Lightweight Insulation
  • High IAQ, Low VOC System
  • Space Saving Insulation - R-6 Insulation with a 7/8" Panel of KoolDuct
  • Smooth Aluminum Interior Surface - As much as 7x smoother than a Fibrous Liner
  • Closed Cell Insulation
  • High Pressure Class Design - 0.5" W.C. to 10" W.C.
01.png

1) Cut

Cut Panels to Size with as Little as a Table Saw and other Commonly Found Shop or Jobsite Tools

02.png

2) Apply

Follow Kingspan's Guidelines to Apply KoolDuct Liner to Metal Ductwork with No Adhesives!

03.png

3) Secure

Insulation Retention Clips are Installed by Kingspan Guidelines. Corners are finished with Kingspan Sealant and edges covered with UL 181 Approved Tape

Stoptheitch.png

Use KoolDuct for Your Duct Liner Today

Request Information Below To Get In Touch!