cGMP, GLP - FDA Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good manufacturing practice and Good laboratory practice.
Search for the supplies that you need here:
------Precipitated Silica USP NF FCC Food Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA, Dubai and UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the material in grams for your laboratory trial and in tons for your plant scale jobs.
Our manufacturing facility is FDA approved and cGMP, GLP (FDA) Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape. We observe WHO Good manufacturing practice and Good laboratory practice.
Precipitated Silica SDS of Manufacturers
Please visit Precipitated silica and also Fumed silica.
Synonyms: Silicon Dioxide
CAS Number: 112926-00-8 or 7631-86-9, Molecular Weight: 60.08, Chemical Formula: SiO2, EINECS EC Number: 601-214-2, FEMA: ----,
益若翼instagram,腋下淋巴排毒手法视频教程Silicon dioxide is generally recognized as safe by the FDA. In the pharmaceutical industry, colloidal silicon dioxide is used in tablet-making, including use as an anti-caking agent, adsorbent, disintegrant, or glidant to allow powder to flow freely when tablets are processed.
Fumed silica also known as pyrogenic silica is a very fine particulate or colloidal form of silicon dioxide. It is prepared by burning SiCl4 in an oxygen-rich hydrogen flame to produce a "smoke" of SiO2.
Hydrophilic fumed silica is used with increasing success in high technology fields including pharmaceuticals, polyester, silicone, paints and coatings.
Hydrophobic fumed silica has a low moisture adsorption, excellent dispersibility, and ability to adjust rheological behavior, even that of polar systems.
Precipitated silica is an amorphous form of silica. It is a white, powdery material, produced by precipitation from a solution containing silicate salts. We offer it in various bulk density.
There is some confusion about nomenclature of silica as Precipitated silica or Fumed silica. The readers are advised to study both these pages.
The analysis Report of Particle Size of Precipitated Silica is produced below. You can enlarge it by increasing your view-ratio.
Here, D0.5 is 2.87 micrometer and D0.9 is 7.16 micrometer
Specifications of Silicon Dioxide USP NF Grade:
(This is a precipitated silica grade.)
Silicon Dioxide is obtained by insolubilizing the dissolved silica in sodium silicate solution. Where obtained by the addition of sodium silicate to a mineral acid, the product is termed silica gel; where obtained by the destabilization of a solution of sodium silicate in such manner as to yield very fine particles, the product is termed precipitated silica. After ignition at 1000C for not less than 1 hour, it contains not less than 99.0 percent of SiO2.
Packaging and storage: Preserve in tight containers, protected from moisture.
Labeling: Label it to state whether it is silica gel or precipitated silica.
Identification: Transfer about 5 mg to a platinum crucible, mix with about 200 mg of anhydrous potassium carbonate, ignite at a red heat over a burner for 10 minutes and cool. Dissolve the melt in 2 mL of recently distilled water, warming if necessary, and slowly add 2 mL of ammonium molybdate: a deep yellow color is produced.
pH: between 4 and 8, in a slurry (1 in 20).
Loss on drying: Dry it at 145 for 4 hours: it loses not more than 5.0% of its weight.
Loss on ignition: Ignite about 1 g of it, previously dried and accurately weighed, at 1000C for not less than 1 hour: it loses not more than 8.5% of its weight.
Chloride: Boil 5 g in 50 mL of water under a reflux condenser for 2 hours, cool, and filter. A 7-mL portion of the filtrate shows no more chloride than corresponds to 1.0 mL of 0.020 N hydrochloric acid (0.1%).
Sulfate: A 10-mL portion of the filtrate obtained in the test for Chloride shows no more sulfate than corresponds to 5.0 mL of 0.020 N sulfuric acid (0.5%).
Arsenic: To pass the test. --- The limit is 3 ppm.
Heavy metals: To pass the test. --- The limit is 0.003%.
Assay: Transfer about 1 g of Silica Gel to a tared platinum dish, ignite at 1000 for 1 hour, cool in a desiccator, and weigh. Carefully wet with water, and add about 10 mL of hydrofluoric acid, in small increments. Evaporate on a steam bath to dryness, and cool. Add about 10 mL of hydrofluoric acid and about 0.5 mL of sulfuric acid and evaporate to dryness. Slowly increase the temperature until all of the acids have been volatilized and ignite at 1000C. Cool in a desiccator, and weigh. The difference between the final weight and the weight of the initially ignited portion represents the weight of SiO2.
Specifications of Silicon Dioxide FCC Food Grade:
Synthetic Amorphous Silica
SiO2 Formula wt 60.08
INS: 551 CAS: [7631-86-9]
Silicon Dioxide occurs as an amorphous substance that shows a noncrystalline pattern when examined by X-ray diffraction. It is produced synthetically, either by a vapor-phase hydrolysisprocess, yielding fumed silica, or by a wet process, yielding precipitated silica, silica gel, colloidal silica, or hydrous silica. Fumed silica is produced in an essentially anhydrous state, whereas the wet-process products are obtained as hydrates or contain surface-adsorbed water.
Fumed silica occurs as a white, fluffy, nongritty powder of extremely fine particle size and is hygroscopic. The wet process silicas occur as white, fluffy powders or as white, microcellular beads or granules and are hygroscopic or absorb moisture from the air in varying amounts. All these forms of Silicon Dioxide are insoluble in water and in organic solvents but they are soluble in hydrofluoric acid and in hot, concentrated solutions of alkalies.
Function: Anticaking agent; defoaming agent; carrier; conditioning agent; chillproofing agent in malt beverages; filter aid.
A. Place about 5 mg of sample into a platinum crucible, mix with 200 mg of anhydrous potassium carbonate and ignite over a burner at a red heat for about 10 min. Cool, dissolve the melt in 2 mL of freshly distilled water, warming if necessary, and slowly add 2 mL of ammonium molybdate. A deep yellow color appears.
B. Place 1 drop of the solution from Identification Test A on a filter paper and evaporate the solvent. Add 1 drop of a saturated solution of o-toluidine in glacial acetic acid and place the paper over ammonium hydroxide. A green-blue spot develops.
Assay: Fumed Silica: Not less than 99.0% of SiO2 after ignition; Precipitated Silica, Silica Gel, and Hydrous Silica: Not less than 94.0% of SiO2 after ignition.
Lead: Not more than 5 mg/kg.
Loss on Drying: Fumed Silica: Not more than 2.5%; Precipitated Silica and Silica Gel: Not more than 7.0%; Hydrous Silica: Not more than 70.0%; Colloidal Silica: Not more than 85.0%.
Loss on Ignition: Fumed Silica: Not more than 2.0% after drying; Silica Gel, Hydrous Silica, and Precipitated Silica: Not more than 8.5% after drying.
Soluble Ionizable Salts (as Na2SO4): Precipitated Silica, Silica Gel, and Hydrous Silica: Not more than 5.0%.
Taloja Mumbai and Ankleshwar, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91-22-23726950, +9123774610, +9123723564
Copyright and Usual Disclaimer is Applicable
Last updated 5-sep-20
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP Ph Eur EP USP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol益若翼instagram,腋下淋巴排毒手法视频教程 --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Sodium Bromate --- Sodium Diacetate -
USP NF FCC Food Grades Manufacturers